3–6 Wing Spiral PDC Drag Bit for Broken Formations - Dr...

3–6 Wing Spiral PDC Drag Bit for Broken Formations

Wing Options: 3 / 4 / 5 / 6 Wings
PDC Cutter: 1613 / Customized
Application: Anchor / Blasting / Water Well / Geothermal
Formation: Mixed / Broken / Medium-Hard Rock
Size: Customizable
Thread: 76 / 89 / REG / Custom

Request a Quote

Enter the quantity you need and add to your quote list for pricing inquiries.

Cantidad:

Description

Product Snapshot

Multi-Wing Spiral PDC Drag Bit Series

Multi-Wing Spiral PDC Drag Bit Series includes 3-wing, 4-wing, 5-wing and 6-wing designs for different drilling conditions. The curved spiral blade structure provides stable cutting, efficient debris removal and good adaptability in mixed and fractured formations.

Equipped with wear-resistant PDC cutters, these bits are widely used for anchor drilling, blasting holes, slope support, foundation projects, water wells and geothermal drilling. Wing quantity, bit diameter, cutter layout and thread connection can all be customized according to formation conditions and drilling equipment.

Wing Options 3 / 4 / 5 / 6 Wings	PDC Cutter 1613 / Customized	Formation Mixed / Broken / Medium-Hard Rock
Application Anchor / Blasting / Water Well / Geothermal	Size 115–311 mm / Customizable	Thread 76 / 89 / REG / Custom

Key Features

One series, four wing configurations

Six design advantages behind the Multi-Wing Spiral PDC Drag Bit Series.

01 / 06

3–6 Wing Options

Different wing quantities allow the bit structure to be matched to formation conditions and drilling requirements.

02 / 06

Spiral Curved Blade Design

The curved spiral profile helps improve cuttings evacuation and maintains smoother drilling.

03 / 06

1613 PDC Cutter Options

Large PDC cutters provide aggressive rock cutting and good wear resistance.

04 / 06

Stable Drilling in Broken Formations

Designed to maintain consistent cutting contact in fractured and mixed formations.

05 / 06

Wide Customization Range

Bit diameter, wing quantity, cutter layout and connection can all be customized.

06 / 06

Heavy-Duty Steel Body

High-strength body structure provides reliable support for demanding drilling operations.

Available Wing Configurations

Choose the right wing count for your project

Each wing configuration is optimized for different drilling priorities — from fast penetration to maximum stability in demanding formations.

3-Wing

3-Wing Spiral PDC Bit

Recommended when:

—	Faster penetration is required
—	Formation is relatively soft or moderately broken
—	Lower cutting resistance is preferred
—	General anchor, water well and grouting drilling

Fast Penetration + Open Cutting Structure

4-Wing

4-Wing Spiral PDC Bit

Recommended when:

—	Better drilling stability is required
—	Formation conditions are mixed
—	Balanced penetration and stability are important
—	Anchor, blasting and geothermal drilling

Balanced Cutting + Stable Guidance

5-Wing

5-Wing Spiral PDC Bit

Recommended when:

—	More cutting contact points are required
—	Larger diameters are used
—	Drilling load is higher
—	More stable borehole performance is required

Higher Stability + Better Load Distribution

6-Wing

6-Wing Spiral PDC Bit

Recommended when:

—	Maximum drilling stability is required
—	Large-diameter bits are used
—	Formation conditions are more demanding
—	More cutting support is required

Maximum Cutting Stability + Heavy-Duty Structure

Wing Configuration Guide

Quick selection reference

Use this guide to match wing quantity with your drilling priorities and formation conditions.

Wing Type	Main Advantage	Recommended Conditions
3-Wing	Fast penetration	Soft to medium formations, general drilling
4-Wing	Balanced stability	Mixed and fractured formations
5-Wing	Higher load distribution	Larger diameter and heavier drilling loads
6-Wing	Maximum drilling stability	Large diameter and demanding drilling conditions

Applications & Formations

Used across anchor, blasting and water well drilling

This spiral PDC drag bit series is suitable for anchor drilling, blasting holes, slope support, water well drilling and geothermal drilling. Other applications include foundation pit drilling, grouting holes, mining construction and engineering drilling.

01 Anchor Drilling Stable guidance and balanced cutting for anchor and slope support drilling.	02 Blasting Holes Efficient drilling for blasting holes in broken and mixed formations.
03 Slope Support Reliable hole formation for slope support and foundation pit projects.	04 Water Well Drilling Efficient penetration for water well projects in mixed formations.
05 Geothermal Drilling Stable drilling performance for geothermal borehole and energy projects.

Suitable Rock Formations

Suitable for mixed, weathered and fractured formations. The recommended wing quantity and cutter configuration depend on rock hardness, abrasiveness, fracture condition and drilling parameters.

Sandstone	Mudstone	Limestone	Backfill
Weathered Rock	Fractured Rock	Mixed Formations	Selected Granite-Bearing Formations

⚠️ Note: The recommended wing quantity and cutter configuration depend on rock hardness, abrasiveness, fracture condition and drilling parameters. Please contact our engineers for formation-specific recommendations.

Available Sizes

Common sizes and custom diameters

Other diameters can be customized according to drilling requirements.

115 mm	125 mm	133 mm	138 mm	140 mm
152 mm	165 mm	171 mm	200 mm	250 mm
275 mm	311 mm	Custom Diameters Available

PDC Cutter Options

Cutter sizes and layouts to match your bit

The series can be equipped with different PDC cutter sizes and quantities according to bit structure.

Common Options

Available Cutter Configurations

—	1613 PDC cutters
—	Reinforced PDC cutter grades
—	Customized cutter quantity
—	Customized cutter exposure
—	Gauge protection cutters

Wing Count Effect

How Wing Count Affects Cutters

—	Larger wing count generally allows more cutter positions and improved load distribution.
—	Lower wing count provides a more open cutting structure and may support faster penetration in suitable formations.

How to Select

How to select the right spiral PDC drag bit

To recommend a suitable configuration, please provide the following information. Our engineers will respond with a factory quotation within 24 hours.

01 Required Bit Diameter Standard or custom diameter.	02 Rock Formation Formation type, hardness and abrasiveness.	03 Drilling Application Anchor / Blasting / Water Well / Geothermal
04 Preferred Wing Quantity 3 / 4 / 5 / 6	05 Thread Connection 76 / 89 / REG / Custom	06 Drilling Rig / Drill Rod Rig model and drill rod specification.

💡 Not sure which wing configuration is suitable?
Send us your formation and drilling information and our engineers can recommend a suitable design.

Factory Customization

OEM & ODM customization for drilling projects

Every drilling project is different. Chenghui Drilling customizes each bit based on your project data — from wing quantity to thread connection.

Formation type, drilling rig, drill rod and drilling parameters all affect drill bit performance. Our engineering team works with your technical data to recommend the most suitable wing quantity and PDC cutter configuration.

— Wing Quantity	— Bit Diameter
— Cutter Layout	— Cutter Grade
— Spiral Blade Geometry	— Thread Connection
— Steel Body Design	— OEM Logo & Packaging

CNC machining of multi-wing spiral PDC drag bit

Multi-wing spiral PDC drag bit welding and assembly process

About Chenghui Drilling

Professional drilling tools manufacturer in China

Chenghui Drilling Co., Ltd. specializes in the design, production and supply of PDC drill bits, tricone drill bits, DTH drilling tools and related drilling equipment for customers worldwide.

Every drill bit is manufactured and inspected in our own factory, ensuring stable quality, competitive pricing and reliable delivery for international drilling contractors and distributors.

Supply Mode Factory Direct	Fabricación In-House
Service OEM / ODM	Market Global Export

Chenghui Drilling Tools production workshop

Get In Touch

Need a customized Multi-Wing Spiral PDC Drag Bit?

Share your drilling requirements with our engineers. We will recommend a suitable wing quantity and PDC cutter configuration, and provide a factory quotation within 24 hours.

1. Required Diameter	2. Rock Formation
3. Preferred Wing Quantity	4. Thread Connection

📩 Request Quote
Contact Engineer

FAQ

1
What wing configurations are available?
+

We manufacture 3-wing, 4-wing, 5-wing and 6-wing spiral PDC drag bits. Different wing configurations can be selected according to bit diameter, formation conditions and drilling requirements.

2
How do I choose between 3, 4, 5 and 6 wings?
+

Lower wing counts generally provide a more open cutting structure and faster penetration, while higher wing counts offer more cutting contact points, improved load distribution and greater drilling stability.

3
What applications are these spiral PDC drag bits suitable for?
+

They are commonly used for anchor drilling, blasting holes, slope support, foundation drilling, grouting, water well drilling, geothermal drilling and engineering construction.

4
What rock formations are suitable?
+

These bits are suitable for sandstone, mudstone, limestone, backfill, weathered rock, fractured rock and mixed formations. The recommended wing quantity and cutter configuration depend on rock hardness, abrasiveness and fracture conditions.

5
Can the bit structure be customized?
+

Yes. We can customize wing quantity, bit diameter, spiral blade geometry, PDC cutter size, cutter quantity, cutter arrangement, gauge protection, thread connection and reinforced body structure according to your drilling project.

Downloads

File	Download
CNC-Machining-Center.pdf	Download

3–6 Wing Spiral PDC Drag Bit for Broken Formations