Three-Wing Carbide Drag Bit for Water Well & Soft Formation Drilling
Taille : 113–240 mm Standard / Up to 325 mm Customized
Cutters: YG6 Cemented Carbide
Utilisation : Water Well / Grouting / Gas Drainage / Anchor / Geothermal
Formation : Soil / Soft to Medium-Soft Rock
Thread: REG / NC / Customized
OEM: Available
Request a Quote
Enter the quantity you need and add to your quote list for pricing inquiries.
Description
Three-Wing Carbide Drag Bit for Soft Formation Drilling
Three-Wing Carbide Drag Bit is designed for efficient non-coring drilling in soil, soft rock and medium-soft formations. The three-wing cutting structure uses high-quality YG6 cemented carbide cutters to provide good wear resistance, stable penetration and reliable performance in water well, grouting, gas drainage, anchor and geothermal drilling.
Standard models are available from 113 mm to 240 mm, with customized sizes up to approximately 325 mm and multiple thread connections available according to drilling equipment.
Size 113–240 mm Standard / Up to 325 mm Customized | Cutters YG6 Cemented Carbide | Formation Soil / Soft to Medium-Soft Rock |
Application Water Well / Grouting / Gas Drainage / Anchor / Geothermal | Thread REG / NC / Customized | OEM Available |
Economical drilling for soft formations
Six design advantages behind the Three-Wing Carbide Drag Bit.
01 / 06 YG6 Cemented Carbide CuttersHigh-quality carbide cutters provide good wear resistance and reliable cutting performance in soft and medium-soft formations. | 02 / 06 Three-Wing Drag StructureThe three-wing layout provides aggressive cutting and efficient formation removal during non-coring drilling. | 03 / 06 Fast Penetration in Soft FormationsThe open cutting structure is designed for efficient drilling in soil, shale, weathered rock and similar formations. |
04 / 06 Wide Size RangeStandard sizes are available from 113 mm to 240 mm, with customized diameters available up to approximately 325 mm. | 05 / 06 Multiple Thread ConnectionsREG, NC and other customized thread connections are available for different drilling rigs and drill rods. | 06 / 06 Economical Drilling SolutionCarbide drag bits provide a practical solution for projects where a PDC structure is not necessary. |
Used across water well, grouting and soft formation drilling
This three-wing carbide drag bit is widely used for water well drilling, grouting holes, gas drainage drilling and geothermal drilling. Other applications include anchor drilling, slope support drilling, foundation construction, engineering drilling and soft formation boreholes.
01 Water Well DrillingFast penetration in soil and soft formations for efficient borehole advance. | 02 Grouting HolesReliable hole formation for grouting and foundation construction projects. |
03 Gas Drainage DrillingEfficient drilling in coal seams and soft interbedded formations. | 04 Geothermal DrillingStable penetration for shallow geothermal well and energy projects. |
Suitable Rock FormationsDesigned primarily for soil and soft to medium-soft formations. This bit is not intended for hard or highly abrasive rock.
⚠️ Note: This carbide drag bit is designed for soft to medium-soft formations. For consolidated or medium-hard rock, please refer to our PDC drag bits. | ||||||||||
Multiple thread standards available
Thread connections can be manufactured according to your drill rod, rotary head or drilling rig.
2 3/8 REG | 2 7/8 REG | 3 1/2 REG | 4 1/2 REG |
NC23 | NC26 | NC31 | NC38 |
Z-50 | Other Customized Connections | ||
Send us a photo or drawing of your existing drill rod, and our team can help identify the connection.
Which drag bit should you choose?
Carbide and PDC drag bits are designed for different formations and drilling priorities. The correct bit type should be selected according to rock hardness, abrasiveness, drilling depth and required penetration rate.
Carbide Carbide Drag BitRecommended for:
| PDC PDC Drag BitRecommended for:
|
Standard sizes and carbide cutter configurations
Standard sizes from 113 mm to 240 mm. Customized diameters up to approximately 325 mm are available on request.
How to select the right three-wing carbide drag bit
To recommend a suitable configuration, please provide the following information. Our engineers will respond with a factory quotation within 24 hours.
01 Required Diameter 113 / 133 / 152 / 165 / 190 / 215 / 240 mm or customized size | 02 Rock Formation Soil / Shale / Weathered Rock / Sandstone / Mudstone | 03 Drilling Application Water Well / Grouting / Gas Drainage / Anchor / Geothermal |
04 Thread Connection REG / NC / Z-50 / Customized | 05 Drilling Rig or Drill Rod Information Please provide drilling rig model or drill rod specification for thread matching. | |
OEM & ODM customization for drilling projects
Every drilling project is different. Chenghui Drilling customizes each bit based on your project data — from carbide cutter layout to thread connection.
Rock formation, drilling rig, drill rod and drilling parameters all affect drill bit performance. Our engineering team works with your technical data to recommend the most suitable carbide cutter layout and thread connection.
|
Professional drilling tools manufacturer in China
Chenghui Drilling Co., Ltd. specializes in the design, production and supply of PDC drill bits, tricone drill bits, DTH drilling tools and related drilling equipment for customers worldwide. Every drill bit is manufactured and inspected in our own factory, ensuring stable quality, competitive pricing and reliable delivery for international drilling contractors and distributors.
|
Need a customized Three-Wing Carbide Drag Bit?
Share your drilling requirements with our engineers. We will recommend a suitable carbide cutter layout and thread connection, and provide a factory quotation within 24 hours.
| 1. Required Diameter | 2. Rock Formation |
| 3. Drilling Application | 4. Thread Connection |
FAQ
Downloads
| File | Download |
|---|---|
| CNC-Machining-Center.pdf | Download |
English
Chinese
Portuguese
French
Spanish
Russian
Turkish
Vietnamese